• Return Home
  • Contact Us

How to "Spec" Premium Diesel Fuel Additives - Original Article

12/8/2010

Introduction

Until the late 1960's and early 1970, diesel fuel supplied in North America was usually classified as "above average" quality.  These fuels were produced by a "straight-run" distillation process with little or no refinery-cracked components in the distillate stream.  Subsequently, due to shrinking availability of  high quality crude oils, the overall diesel fuel quality world- wide has shown decreasing tendencies.  Since crude oil reserves are being consumed at an ever-increasing rate, a continued downward trend seems inevitable.

For oil refiners, extra processing and blending is a practical, though not always easy, option for improving some fuel properties; however, it entails compromises.  For example, ignition quality can be improved by including more paraffin's, but this inclusion negatively impacts the required low-temperature operability properties.  Another possibility is adding aromatics to increase the fuel's calorific value, but aromatics generally burn poorly and tend to cause smoking.  Due to these and other types of diametrical trade-offs, the scope of distillate processing and fuels blending at the refinery is often very limited.  Therefore,  fuel additives are rapidly becoming the only alternative for obtaining the superior quality necessary in fuel termed as "Premium Diesel Fuel"
 
Premium Diesel Fuel Additives

Additives targeted expressly to compliment certain fuel specifications are often an easier and much more cost-efficient means to enhance fuel quality without the negative of fuel processing and finished product blending.  Premium Diesel Fuel Additive chemicals are supplied by various selling entities in North America.  Although, the inherent quality of a fuel may negate the need to add all of the following chemical components, the specific parameters and how each might impart added value to the finished fuel must be seriously considered before the fuel can be marketed as "Premium": 

Detergents, Deposit Modifiers, Insoluble Dispersants, Cetane Improvers, Corrosion & Rust Modifiers, Metal Deactivators, Sludge Retardants, and De-Emulsifiers.

       

CHEMICAL COMPOUNDS AND PURPOSES
(diesel fuel additive components and their reasons for inclusion in formula)

Anti-Oxidants                   Stabilize the fuel and prevent Particulate formations
 
Anti-Rust Agents              Reduce from oxidation in tank and fuel system
                                          components                                                                 

Cetane Improvers             Raise Cetane to improve starting
  
Corrosion Inhibitors          Stop Oxidation/Acid attack in fuel system   

De-emulsifiers                   Anti-Moisture agent to break fuel and water emulsions   
 
Deposit Modifiers              Minimum non-combustion and fuel deposits
 
Detergents                        Clean fuel system components and insure
                                          proper operation
 
Dispersants                       Break up fuel insolubles and  improve filterability
 
Metal Deactivators            Counteract catylitic oxidation effects on fuel and
                                           fuel systems
 
Pour Point Depressants      Lower pour flow temperature of fuel


Wax Modifiers                    Reduce wax crystal size to improve fuel filterability
                                            and flow     
 

Each of these performance additives may be added separately to the base distillate fuel or they may be compounded into a comprehensive chemical package formulated specifically at the chemical supplier's recommended dosage levels for making Premium Diesel Fuels.  For the current low-sulfur #2D fuels (0.05% wt.) and future extremely low-sulfur (0.005% wt.), a compatible Lubricity Additive is also a necessity. 

Winter poses additional fuel flowability and operational problems.  Cloud Point, Pour Point, and Cold-Filter Plug Point (CFPP) Reducers are common fuel additives that should be added to premium quality diesel fuels to protect the purchaser and insure proper cold-temperature properties in the Premium Diesel Fuel.

The incorporation of the proper amounts of these chemical additives in the base diesel fuels will guarantee optimum performance and dependability at the most economical price.
 
(continued)
              

To receive a copy of the full text of this or other articles in the series by mail, please contact us.

 
Go to the complete list of articles on "How To 'Spec' Premium Diesel Fuel Additives".
 
Go to other News and Events.